DHCP Server Settings
DHCP (Dynamic Host Configuration Protocol) Server Settings are commonly found on broadband router firmware. The DHCP section is where you can configure the router’s built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network (LAN). Other DHCP options include Enable DHCP Server and Add or Edit DHCP Reservation.
See “Common Router Settings” in the Quick Reference section of
Read Also:
- DIB
(1) Short for Dual Independent Bus, a bus architecture that is part of Intel’s Pentium Pro and Pentium II microprocessors. As its name implies, DIB uses two buses: one from the processor to main memory, and the other from the processor to the L2 cache. The processor can access both buses simultaneously, which increases throughput. […]
- DICOM
Short for Digital Imaging and Communications in Medicine, a standard in the field of medical informatics for exchanging digital information between medical imaging equipment (such as radiological imaging) and other systems, ensuring interoperability. The standard specifies: a set of protocols for devices communicating over a network the syntax and semantics of commands and associated information […]
- DID
Short for direct inward dialing (also known as direct dialing inward), a service of an LEC or local phone company that allows an organization to have numerous individual phone numbers for each person or workstation in its PBXsystem that run off of a small block of dedicated telephone numbers. DID allows the multiple lines to […]
- DIIOP
Short for Dominio Internet Inter-Orb Protocol it allows external programs to attach to, and manipulate Domino databases. DIIOP is frequently used to allow Java-based and other non CORBA programs to connect to Lotus Domino.
- DIMM
Short for dual in-line memory module, a small circuit board that holds memory chips. A single in-line memory module (SIMM) has a 32-bit path to the memory chips whereas a DIMM has 64-bit path. Because the Pentium processorrequires a 64-bit path to memory, you need to install SIMMs two at a time. With DIMMs, you […]