To turn a machine off.
- power factor correction
Power factor correction (PFC) is a newer technology used in computer power supplies. PFC is applied to the circuits that include induction motors as a means of reducing the inductive component of the current and thereby reduce the losses in the supply. PFC has no effect on the operation of the motor itself. [Source: Adapted […]
- power line Ethernet bridge
A power line Ethernet bridge is a HomePlug device used to extend a LAN into a separate room using the existing electrical system in the building. An Ethernet cable from the network router is plugged into a bridge, which plugs into an AC wall outlet. In a separate room, a second bridge plugs into the […]
- power line networking
Power line networking uses power line communications (PLC) to connect computers using existing power outlets in the home, essentially transforming every electrical outlet in the building into a network connection. Power line networking is one of the cheapest forms of home networking and has a low start-up cost and minimal IT workload. And despite using […]
- power management
Efficiently directing power to different components of a system. Power management is especially important for portable devices that rely on battery power. By reducing power to components that aren’t being used, a good power management system can double or triple the lifetime of a battery.
- power-on self test
Abbreviated POST, a diagnostic testing sequence run by a computer��s BIOS as the computer��s power is initially turned on. The POST will determine if the computer��s RAM, disk drives, peripheral devices and other hardware components are properly working. If the diagnostic determines that everything is in working order, the computer will continue to boot.