TTL monitor
TTL stands for transistor-transistor logic and refers to a special type of digital circuit. More commonly, however, TTL is used to designate any type of digital input or device. A TTL monitor, therefore, is a monitor that accepts digital input. TTL monitors are consistent with older graphics standards such as MDA, but all newer graphics standards, including VGA, require analog signals.
Read Also:
- Text to Speech (TTS)
Text to speech, abbreviated as TTS, is a form of speech synthesis that converts text into spoken voice output. Text to speech systems were first developed to aid the visually impaired by offering a computer-generated spoken voice that would “read” text to the user. TTS should not be confused with voice response systems. Voice response […]
- TWAIN
The de facto interface standard for scanners. Nearly all scanners come with a TWAIN driver, which makes them compatible with any TWAIN-supporting software. However, not all scanner software is TWAIN-compatible.
- TWIP
Short for twentieth of a point , a typographical measurement.
- T-1 carrier
A dedicated phone connection supporting data rates of 1.544Mbits per second. A T-1 line actually consists of 24 individual channels, each of which supports 64Kbits per second. Each 64Kbit/second channel can be configured to carry voice or data traffic. Most telephone companies allow you to buy just some of these individual channels, known as fractional […]
- T-3 carrier
A dedicated phone connection supporting data rates of about 43 Mbps. A T-3 line actually consists of 672 individual channels, each of which supports 64 Kbps. T-3 lines are used mainly by Internet Service Providers (ISPs) connecting to the Internet backbone and for the backbone itself. T-3 lines are sometimes referred to as DS3 lines.